看一级黄色,正在播放国产精品白丝在线,亚洲欧美偷拍视频

BYD forklift forklift operation precautions -

The cargo unit can be enlarged to save transportation time

The fork deflection test of the prototype is not higher than the 40mm designed in this article

It has the ability to pick up cargo directly from the side without turning, so it is mainly used to pick up long cargo such as wood strips, steel bars, etc

Check the reversing buzzer and hazard warning lights; 7

Otherwise, it is easy to damage the ground and forklift wheels, and it will cause accidents such as cargo collapse, damage to buildings and injuries to personnel

Use a grinding wheel to grind out the weld bevel at the crack

Equipment transportation by electric trucks The arc should be as short as possible, the electrode diameter is 4mm, and the current is about 210-240a

It also has the advantages of ultra-low noise and ultra-low vibration

Finally, modular modeling is carried out through 3D software, and the rationality of the design is verified through prototype testing to ensure that the product has the advantages of narrow stacking channel, high storage efficiency, and high storage capacity rate

They are widely used in the warehousing industry because of their compact body, flexible mobility, light weight and good environmental performance

(5) Choose the correct driving direction and control the speed at an ideal level

The mast of the reach truck can move forward along the track inside the leg with the lifting device to facilitate forking the goods Using lithium battery design: Compared with traditional lead-acid batteries, BYD iron batteries have several major technical advantages: low use cost and battery cycle of about 10 years, which are unique advantages that traditional rechargeable batteries cannot match

BYD forklift forklift operation precautions -

The use of upright motors makes the inspection and maintenance of motors, brakes, etc

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area Certification conditions: 1

In order to make the electric transport truck run smoothly during use and the fork lift smoothly, we should add lubricating oil to the transport truck, which can reduce the friction of various components and prevent damage to the parts caused by excessive wear

Although electric trucks are superior to manual trucks in terms of configuration, load-bearing, operation, lifting, and work efficiency, manual trucks also have their advantages

Therefore, the "oil-filled" lifting cylinder is used to fill the inner cavity of the cylinder with hydraulic oil, which can effectively prevent the inner wall of the cylinder from rusting

The greater the output of the same product, the lower the purchase cost of a single component will be

Speed regulating device It operates normally at 24V voltage and the speed is adjusted by electronic control

(3) High and low temperature performance: It can be used normally at 60℃, without the need for additional air conditioning equipment or charging temperature compensation (3) Container forklift: It uses a diesel engine as its power source, has a load capacity of 8

When working in multiple shifts, electric motor-driven warehouse forklifts need to have backup batteries

Avoid slippery areas as much as possible

There are three operating modes: walking, standing and riding

Internal combustion forklift vs electric forklift Electric forklifts are electrically driven

BYD forklift forklift operation precautions - When the battery is arranged on the rear axle, the maintenance of the motor and hydraulic pump is more convenient, because after removing the battery and the pedal, the motor and hydraulic pump are clearly visible 1

Use brushless DC motor to control the drive system

Therefore, it requires the joint attention of the entire forklift manufacturing companies, sales companies, leasing companies, maintenance companies, and spare parts facilities companies

SZ), and Dongjie Intelligent (300486

With the increasing domestic demand for transportation efficiency, transportation safety and replacement of labor, electric walk-behind warehouse trucks are favored by more and more companies for their flexibility and efficiency

It mainly includes inspection before use, inspection during work and maintenance after returning to the warehouse When the electric transport truck is not in use, put the fork to the bottom and store it in a designated location without affecting other operations The following subdivided industry application scenarios will help you understand the technical advantages of BYD's new energy forklifts

However, there are also some key points that need to be paid attention to during operation

Humanized handle design: Focusing on the user's height, body shape and hand shape, the handle design is also designed to maintain human health and high-frequency work efficiency, greatly improving the user experience High-performance wear-resistant silent wheels: Advanced technology wheels, with humanized operating experience, and silent performance allows space users to rest assured without being disturbed

(CATL)

Usually, the front overhang of an electric hydraulic forklift, the length of the forklift fork/pallet and the safety distance are all fixed values

Except for the forklift body, all parts of the forklift meet the explosion-proof requirements

99re久久在热线播放最新地址-99re久久资源最新地址-99re免费-99re热久久-久久国产精品一国产精品-久久国产精品一国产精品金尊

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info