中文字幕日韩专区,小明看看永久视频,亚洲欧美日韩精品在线

BYD high-rise storage electric forklift has no power. How to push it manually?-

Hong Kong people like to call it a forklift, while Taiwanese people call it a stacker

BYD forklifts have performed well in this field of operation and have become a product favored by many logistics enterprise users

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

The reach truck is similar to the leg-type forklift in that the center of gravity of the goods falls within the support plane of the vehicle, so it has good stability

After years of development, the engine technology is relatively complete and the domestic price is not high

1M, etc The constant pressure spring pressure borne by the carbon brush should be normal, and the total area of the carbon brush during the running-in period should not be less than 80% It is not allowed to unload goods by picking, pushing or bumping the pallet with a fork; 10 If you are interested in electric tablet electric transport trucks, you can call us anytime, anywhere The steering operation is the same as the way we drive a car, and the forklift bearing and forklift fork can be controlled by the joystick

※ The brake function is normal

(9) It is prohibited to use a forklift to lift people to perform work at heights to avoid accidents of falling from heights

Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

BYD high-rise storage electric forklift has no power. How to push it manually?-

Before moving the forklift, you must check whether the brakes and batteries are fully charged

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

When driving at an intersection, you must slow down, honk the horn, and confirm the KY; 3

Considering the needs of warehouse high-rise operations and the height of the warehouse, the lifting height of the forklift should be appropriately considered from the standard configuration of 3

Tilt the joystick to tilt the mast backward to prevent the cargo from falling while the electric forklift is driving

When the battery electric flatbed truck is in operation, the most important thing is to maintain its battery

Since the birth of forklift, it has gone through a hundred years of changes and now has taken the "C position", becoming an indispensable equipment in production and warehousing operations

■ Higher security An optional disengagement device is provided for electric forklifts to be used for towing the vehicle in an emergency

Electric trucks save time, effort, energy, cost and efficient operation

③ Check the wear of the brushes in the hydraulic pump motor and replace any brushes that may not meet the requirements to maintain good contact

In the production of circuits and parts, some manufacturers use inferior accessories to reduce costs

Take Noli as an example If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving

BYD high-rise storage electric forklift has no power. How to push it manually?-

In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor

The operator must understand the condition of the vehicle before using it, and must not allow unsupervised personnel to operate it at will; therefore, when using an electric transport truck, it is necessary to use it in a standard manner, and at the same time it is necessary to pay attention to its protection and maintenance to extend its service life

At the same time, it can meet the production needs of various electric forklifts and non-standard forklifts

3 When approaching the goods, it should stop first, wait until the position is clear, and slowly align the double forks with the goods The reduction in contacts can effectively reduce the maintenance cost of electronic components

This is the top priority

and Hangzhou Pengcheng New Energy Co

At the same time, we also noticed that in 2019, the growth of electric walk-behind warehouse trucks began to show signs of slowing down

Gasoline forklift: 1-7 tons, including single fuel and dual fuel

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

7-3

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

The vehicle uses intelligent rechargeable batteries to increase battery charging time

99re久久在热线播放最新地址-99re久久资源最新地址-99re免费-99re热久久-久久国产精品一国产精品-久久国产精品一国产精品金尊

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info