欧美综合区,国产日产亚洲系列首页,久久新网址

BYD warehouse truck charging process video- What are they? The following is a brief sharing by BYD lithium battery forklift: It needs to be emphasized that the difference between lithium-ion forklifts and traditional electric forklifts is not as simple as replacing batteries

The most commonly used is lead-acid battery, which requires regular inspection of the battery fluid level

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

The rapid development of electronic control technology has made the operation of electric forklifts more and more comfortable, with a wider range of applications and more and more solutions to logistics

The pole coil is made of F-class insulation copper core wire and soaked in F-class three-proof paint

It involves a whole set of software matching and service support

Its working principle is to convert chemical energy into electrical energy

Today, the forklift editor will explain it to you As for the third type of electric technology forklifts, they have not yet been put on the market in large quantities

Check before use: (1) Check whether the fuel, lubricating oil, hydraulic oil and coolant are sufficient

“It features heavy-duty components, a rugged design, a reliable electrical system and easy serviceability, and can be combined with other options to further match the truck to the specific application

During normal use, pay attention to the insulation of the battery

, a subsidiary of Hangcha Group, achieved sales of 120 million forklift AGV bodies in 2019

0 to 52

The advantages of easy operation, simplicity and high efficiency also make electric transport trucks quickly sell well in the market

BYD warehouse truck charging process video-

The specific size and load range still need to be determined by the company according to its own needs and the model of the electric transport truck

We see on TV that there is a kind of transport vehicle in many warehouses

During the unloading process, rapid descent and unloading are strictly prohibited; 12 High-position side fork detection: Test the stability of the side fork at different loads, different side fork heights, and different fork entry speeds

considerable

, Ltd

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

On the contrary, the market demand for environmentally friendly Foshan forklifts will inevitably increase year by year

On the basis of primer spraying, the iron plate of the body can be sprayed with a low-temperature rust-resistant protective layer to cope with the huge temperature difference in the storage operation

8-46 tons, gasoline forklift: 1-7 tons, electric forklift: 0 6

BYD warehouse truck charging process video- It is suitable for use in small spaces

The other is to fix the wheel axle with an elastic pin, which needs to be knocked out with a punch

Open the electric lock, move the steering wheel to its moving position, slowly turn the accelerator, and move to the corresponding working area

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

Anhui Yufeng Warehouse Electric Transporter Product Advantages: ?Electronic control, controller with multiple automatic protection systems

Before repair, calibrate the mast of the electric forklift to maintain its inherent straightness

The longer it is open to the outside world, the longer it will have the longest and strongest vitality

First, turn on the emergency cut-off switch of the electric pallet truck

Using lithium battery design: Compared with traditional lead-acid batteries, BYD iron batteries have several major technical advantages: low use cost and battery cycle of about 10 years, which are unique advantages that traditional rechargeable batteries cannot match

Lithium batteries are a type of battery that uses lithium or lithium alloys as negative electrode materials and non-aqueous electrolyte solutions

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system It is understood that the battery production base of Xin Power now uses the latest fully automated production line, which has the characteristics of high precision, high speed, and high intelligence, to ensure the precise control of intelligent automation during the battery production process and to ensure the consistency requirements of battery production 8 It can be said that if you understand the parameter table of one electric forklift, you can understand all types of electric forklifts based on the data

Whether it is lead-acid batteries or lithium batteries, electric transport truck manufacturers can provide them to everyone, and recommend the most suitable electric transport truck and batteries that match it according to the company's own needs

99re久久在热线播放最新地址-99re久久资源最新地址-99re免费-99re热久久-久久国产精品一国产精品-久久国产精品一国产精品金尊

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info