亚洲国产高清在线,欧美伦禁片在线播放,国产精品久久久久久一级毛片

BYD lithium battery forklift manufacturer how to adjust the front and rear-

When choosing a battery for an electric truck, it is very important to choose the type of battery according to your needs

China, as the world's most populous country, has a very low per capita cold storage area, and there is still huge potential for cold storage development (at a rate of more than 35%) When carrying large objects, the objects block the driver's view, and the forklift should be reversed The precautions for cold storage forklifts mainly include the following aspects: 1

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

The hydraulic oil temperature is too high, resulting in a decrease in viscosity and deterioration, and it needs to be replaced in time

When the warehouse electric forklift forks goods onto the shelf, it should slow down and pay attention to the height of the double forks

Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

Customized equipment transportation plans, a high-tech enterprise integrating machinery and equipment research and development, manufacturing and sales

Therefore, full attention should be paid Electric transport trucks are powered by batteries, driven by DC motors, and lifted by hydraulic power units; they have the advantages of fast running speed, small size, simple and flexible operation, low noise, and no pollution 9 Internal combustion: Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy-duty forklifts, container forklifts and side forklifts

Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience

BYD lithium battery forklift manufacturer how to adjust the front and rear-

When the gear is adjusted to the tortoise speed, the speed of the battery truck will be limited, and it will not be too fast when accelerating

2-week inspection Forklift users should spend a few minutes each week cleaning the machine, paying special attention to removing any entanglements such as silk, linen, and rags around the wheels and axles

Electric forklifts have become a more practical factory transportation equipment at present

They have become the first choice of logistics handling equipment for many companies, resulting in good industry user reviews and brand awareness

Therefore, when purchasing an electric transport truck, it is not enough for companies to only compare the price of the forklifts

Use your thumb to slowly turn the direction speed control button backwards

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

(4) When turning, if there are pedestrians or vehicles nearby, you should signal and refrain from making sharp turns at high speeds

Battery charging ① Connect the charger plug to the battery power plug, turn on the charger to charge the battery The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward When storing materials in the shelf area, the action flow is shown in Figure 1-(b) Due to their wide range of uses, many manufacturers can customize them to meet the needs of different users It is widely used in petroleum, chemical, coal, metallurgy, transportation, shipbuilding and other industries

When the electric forklift is operating in the warehouse, it should be avoided that the forklift is driving and lifting at the same time 9

BYD lithium battery forklift manufacturer how to adjust the front and rear-

The editor of new energy electric vehicles will explain its advantages to you

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

7MPa) to drive the lifting hydraulic cylinder and the tilting hydraulic cylinder The low-carbon and environmentally friendly characteristics of electric forklifts are in line with the theme of contemporary energy development

Then check carefully to determine the crack boundary, and drill a ￠5-￠8mm limit hole 10mm beyond the boundary

1 Understand usage requirements There are many types of forklifts

Human handling is extremely labor-intensive and costly, and even poses safety risks

Disadvantages: Electric transport trucks must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive

are electric forklifts

They are widely used in national economic sectors such as stations, ports, airports, factories, warehouses, etc

They fully consider the safety and comfort of the driver and combine many ergonomic designs to make it easier for the driver to get through the running-in period

The process holes or functional holes exposed on the body should also be plugged with waterproof plugs

99re久久在热线播放最新地址-99re久久资源最新地址-99re免费-99re热久久-久久国产精品一国产精品-久久国产精品一国产精品金尊

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info